Betaflight Bridge

Turn the board into a wireless MSP link for the Betaflight Configurator.

Bridge mode turns ShutterBridge into a transparent wireless MSP link: it exposes the flight controller’s serial port over Wi-Fi so the Betaflight Configurator can connect to the FC without a USB cable. The board becomes a plain pass-through - no camera control, no OSD - until it reboots.

Enable it

  1. Open the web UI (http://10.0.0.1) and go to the System tab.
  2. Under Betaflight bridge, press Enable and confirm.

The page shows a full-screen notice while the bridge is active. The on-board LED turns violet (see Status LED).

Connect the Configurator

Use the Betaflight Configurator desktop or mobile app:

  1. In the Configurator, choose the Manual connection option.
  2. Enter the address tcp://10.0.0.1:5761.
  3. Connect as usual.

Exit

Reboot the board to leave bridge mode and return to normal camera operation - power cycle it, or press Reboot on the notice shown while the bridge is active.